OPT-2206 provide 6-port Gigabit Switch with Adaptive 4 x10/100/1000M RJ45 ports and 2x1000M standard SFP fiber port, users may need to use different SFP modules, such as 1000Base-T, 1000Base-SX, 1000Base -LX and so on. Switch by the United States the latest Marvell IC, stable performance and excellent quality, with a higher cost. For small optical Ethernet and optical network with special needs.
Features
■ Provides 4-Port 10/100/1000 Mbps RJ-45 and 2-port GIGA SFP fiber ports
■Conforms to IEEE 802.3 10BASE-T, IEEE802.3u 100BASE-TX, IEEE 802.3ab 1000BASE-T and IEEE 802.3x flow control standards
■SFP port supports 1000BASE-SX/LX modules
■Supports 10/100Mbps auto-detect half/full duplex and 1000Mbps at full duplex
■Supports TP interface auto MDI/MDI-X function for auto TX/RX swap
■Supports 802.3x flow control pause packet for full duplex
■Supports up to 10K Byte Jumbo frames
■LEDs to indicate: 10/100/1000Mbps, Link/Act. and Power Status
■Slim & Compact design
■RoHS Compliance
Technical Specification
■Standard compliance :
■IEEE 802.3 10Base-T Ethernet(twisted-pair copper)
■IEEE 802.3u 100Base-TX Ethernet(twisted-pair copper)
■IEEE 802.3ab 1000Base-T Ethernet(twisted-pair copper)
■IEEE 802.3Z 1000Base-T Ethernet(Gigabit Fiber)
■ANSI/IEEE 802.3 Auto-negotiation
■MAC Address : 1K
■Network Interface : 4 x10/100/1000Mbps RJ-45 ports
■Media :
■10BASE-T: UTP Cat. 3, 4, 5 or up
■100BASE-TX: UTP Cat. 5 or up
■1000BASE-T: UTP Cat. 5 or up
■ fiber multi-mode：50/125，62.5/125μm（distance up to 550/224M）
■ fiber single-mode：8/125，8.7/125，9/125μm（distance up to 10～100KM）
■Transmission Mode : 10/100Mbps, full/half-duplex (Auto-sensing)
■Buffer Memory : 1Mbit on chip frame buffer
■Switching Method : Store & forward
■Size: 31(H)×102(W)×144(L)mm